Specifications

Artist Series and Pro Tools Guide10
EuControl Basics
EuControl software lets you see which controllers are communicating, configure their layout (fader order),
and customize Soft Keys and other controls. This section provides a few basic instructions about EuControl
software. For information on each of the tabs and settings available in EuControl software, see the User
Guide for your Artist Series controller.
To jump directly to Pro Tools basics, see “Using the Transport” on page 20.
Viewing EuControl Settings On-Screen
To view assignments on-screen:
1 Make sure EuControl is running, then launch Pro Tools.
2 Open the EuControl Settings window by doing the following:
• On Mac, click the EUCON icon at the upper right of your screen and choose
EuControl Settings.
• On Windows, click the EUCON icon in the System tray (or select
EuControl Settings from the Start
menu).
3 When the EuControl Settings window appears, click the Soft Keys tab. The currently assigned Soft Keys
are shown.
Soft Keys tab in EuControl Settings (Artist Transport shown)
If the EuControl Settings window doesn’t look the same as the picture above, check the Section menu lo-
cated in the upper left of the EuControl Settings window. If necessary, click it and choose Softkeys (choose
the one with the small image of Artist Transport).