Setup guide

Preventative Maintenance
84
18. Select the Boot Device Priority menu, and make sure the 1st Boot Device displays the RAID
drive that you changed to on the Hard Disk Drives menu.
19. Press F10.
You will be asked if you want to Save configuration changes and exit setup.
20. With Ok selected, press Enter to save your configuration settings, and reboot the system.
21. When the system restarts, log into Windows.
22. Right-click on My Computer, and select Manage.
23. In the left pane, select Disk Management.
Note the following:
- Disk 1appears in the right pane as the E: drive.
- Disk 2 (which includes drives 1-10 for four (4) channel model servers, and 1-5 for two
(2) channel model servers) appears in the right pane as a Foreign disk.
The Disk section should look like the following: