Setup guide

Performing System Diagnostics
61
Starting the Hardware Test
The core test verifies the baseboard and VIO board information. If you want, you can run
additional tests by connecting loopback cables to their respective input signals.
To begin testing:
1. Click the Hardware Tests icon.
The Hardware Tests section opens.
2. (Optional) To run additional tests, connect all the required external cables.
3. (Optional) Select the cables you connected and the additional tests you want to run from the
“Select loopback cables installed” list.
After you select the external cable installed, the required connections section displays
information about where to connect the cable. Verify that you have connected the cable to
the correct connections.