Setup guide

Cabling Up the AirSpeed 5000 Server
53
n
If your Automation device uses an RJ45, you need to supply an RJ45 to DB9 converter to connect
to the Multi I/O Expansion Panel.
b. Connect the other end of the serial cables to your RS-422 devices.
Connecting a GPIO Device
The following topic describes how to connect a GPIO device to the AirSpeed 5000 server via the
Multi I/O Expansion Panel.
For more information on GPIO specifications, see “Connector Pinouts and Connections” on
page 103.
To connect a GPIO device:
1. Connect your GPIO device directly to the GPIO port on the Multi I/O Expansion Panel:
2. Connect the other end of the cable to your GPIO device.
RS-422 Ports
RS-422
GPIO
EXPANSION
AIRSPEED 5000
5 6
7
8
1
1
2
2
3
3
4
4
REF
LTC
OUT
IN
1 2
34
1 2 3
4