Setup guide

Cabling Up the AirSpeed 5000 Server

t If your site does not require GPIO, or additional LTC capabilities, you can use the Reference

and LTC breakout cable (7070-30344-00), and the Serial Breakout cable (7070-30394-00),

as shown in the following illustration, to connect to the Multi I/O Expansion Ports on the

rear of the AirSpeed 5000 server:

Connecting SDI Video Inputs and Outputs

The SDI Video connections are marked on the rear of the AirSpeed 5000 server. The following

procedures describe which connector to use to connect SDI Video Input, SDI Video Outputs, and

Auxiliary Monitor Outputs.

For more specific information, see the following topics:

• “Connecting SDI Video Inputs” on page 45

• “Connecting SDI Video Outputs” on page 45p

• “Connecting Auxiliary Monitor Outputs” on page 46