Setup guide

Cabling Up the AirSpeed 5000 Server

Once the AirSpeed 5000 server is securely installed in the rack, and the drives are installed, you

are now ready to connect the appropriate cables to the rear panel of the AirSpeed 5000 server to

the external devices for your particular site. This section contains the cabling diagrams and

instructions for your AirSpeed 5000 server.

Do not connect the AirSpeed 5000 server to your Avid ISIS environment until you have

assigned it a new unique IP address.

The following sections describe the cabling and connection information for the AirSpeed 5000

server:

• AirSpeed 5000 Server Connection Information

• Multi I/O Expansion Panel Connection Information

• Connecting SDI Video Inputs and Outputs

• Connecting Video Reference

• Connecting LTC

• Converting BNC Connectors to XLR

• Connecting Ethernet

• Connecting Serial

• Connecting a GPIO Device

• Connecting a Keyboard, Monitor, and Mouse

• Connecting the Power Cords

• Turning On the Avid AirSpeed 5000 Server