Setup guide

Installing the Avid AirSpeed 5000 Drives
38
3. From the rear of the rack enclosure, secure the Panel to the rack with the large screws
included with the Panel.
n
You can use your own rack hardware if your rack has square holes or unique fasteners.
Installing the Avid AirSpeed 5000 Drives
This topic contains information on inserting drives in the AirSpeed 5000 server.
n
The drives that were shipped with this server are pre-configured for use with this server only.
Therefore, when installing the drives, make sure to use these drives only.
To install a drive in the Avid AirSpeed 5000:
1. Locate the data drives that came with your Avid AirSpeed 5000.
2. Select one drive.
3. Push the drive carrier latch in to release the handle and pull the handle completely open to
insert the drive carrier.
RS-422
12
3
4
LTC
OUT
IN
12
34
1 2 3
4
GPIO
EXPANSION
AIRSPEED 5000
5
6
7
8
1
2
3
4
REF