Setup guide

Installing Avid AirSpeed 5000 Hardware in a Rack
36
4. Insert the small (10-32) Phillips-head screws through the round-hole adapter and mounting
rail, into the bracket. If the rack holes are different size, you need to supply your own screws
Securing the Outer Slide Rail to the Rack-Mounting Rail
5. Adjust the outer slide rail bracket assembly to the rear mounting rail.
6. Secure the rear outer slide rail bracket assembly to the rear mounting rail as you did for the
front rack-mounting rail.
7. Repeat this procedure to attach the second outer slide rail on the other side of the rack.
Securing the Avid AirSpeed 5000 in a Rack
c
You should have someone helping you lift the Avid AirSpeed 5000 while you are positioning
it into the slide rails.
To secure the Avid AirSpeed 5000 Server to the rack enclosure:
1. Lift and position the Avid AirSpeed 5000 server so that the inner slide rails (secured to the
Avid AirSpeed 5000 server) are align with the outer slide rails secured to the rack.
2. Push the front of the Avid AirSpeed 5000 flush against the front mounting rail. The holes in
the Avid AirSpeed 5000 server front panel align with the holes in the front mounting rail.