Setup guide

Installing Avid AirSpeed 5000 Hardware in a Rack

5. Secure the rear outer slide rail bracket assembly to the rear mounting rail as you did for the

front rack-mounting rail.

Securing the Outer Slide Rail to the Rear Rack-Mounting Rail

6. Repeat this procedure to attach the second outer slide rail on the other side of the rack.

Attaching the Outer Rails to a Round-Hole Rack

After separating the slide rails as previously described (see “Separating the Slide Rails” on

page 31), perform the following procedure. If your mounting rails have round holes, you first

need to clip on the round hole adapter.

To attach the outer slide rails to the rack with round holes:

1. Locate the four round hole adapters (which ship in the accessory kit's plastic bag, not in the

rack mount kit box) and position the adapter on the end of the outer slide rail bracket

assembly as shown in the following illustration.

Attaching the Round Hole Adapter to the Bracket Assembly

Round hole adapter

Outer slide rail bracket assembly

Bracket assembly tabs