Setup guide

Installing Codecs On Your Video I/O Board (2-Channel Models Only)
28
6. Reattach the Card guide, and tighten the thumbscrews.
n
When reattaching the Card Guide, make sure the Video I/O board (top) and Hydra card (bottom),
are secured in their respective slots.
7. (Option) Reattach any cables that were removed from any add-in cards.
8. Replace the server main cover, and tighten the thumbscrews. For more information, see
“Removing and Replacing the Server Main Cover (2-Channel Models)” on page 20.
9. (Option) If you want to make sure the codecs have been applied properly, as well as to make
sure your system’s hardware is working properly, you can perform system diagnostics before
you rack mount the system. Performing system diagnostics now requires that you connect all
peripheral devices, and AC power cords into the server, and power up the server, then
running System diagnostics. For more information on performing system diagnostics, see
“Performing System Diagnostics” on page 57.
Otherwise, you can rack mount your system now, connect all peripherals, and power on the
server after it has been rack mounted, and then perform system diagnostics later.
For more information, see “Installing Avid AirSpeed 5000 Hardware in a Rack” on page 29.