Setup guide

Installing Codecs On Your Video I/O Board (2-Channel Models Only)
17
Installing Codecs On Your Video I/O Board
(2-Channel Models Only)
2-channel model servers are shipped without codec modules installed. Therefore, the codec
modules must be installed onto the Video I/O board before the server is rack-mounted. Since, the
codec modules are shipped separately from the server, make sure you locate the package
containing the codec modules before proceeding.
n
This task is not required for 4-channel model servers. They already come equipped with the
appropriate codec modules installed on the Video I/O boards.
This topic contains information on how to open the chassis cover and attach the supplied
MPEG-2 HD or AVC-Intra codec modules to the Video I/O board of your 2-channel model
server.
This task specifically involves removing the Video I/O boards, and attaching two (2) MPEG-2
HD or AVC-Intra codec modules to the Video I/O board, and then replacing the Video I/O board
in the server.
The following topics are available:
• AirSpeed 5000 Codec Module Kit Contents (2-Channel Models)
• Electrostatic Discharge Precautions
• Codec Module Installation Checklist (2-Channel Models)
• Performing System Diagnostics