Setup guide

AirSpeed 5000 Server Hardware Components
8
System Front Panel and LED Control Panel
The system has two buttons (Power and reset), and 5 LEDs located on the left rack ear next to the
front panel. The following figure shows the front view and LED control panel.
System Front View and LED Control Panel
The following table describes the control panel shown in the previous figure.
1
2
1
2
B
C
A
D
F
E
AIRSPEED 5000
System Control Panel
Letter Description Description
A Power button Press to power on the server. Power button
illuminates green when the power is on.
B Power LED Illuminates green when the system is powered
on.
C System Drive activity LED Indicates drive activity from the onboard
SATA controller and blinks when either of the
system drives is being accessed.
D Two green network activity LEDs Illuminates green when a good network
connection is established and blinks when
there is network activity on the four built-in
1-GB network ports. The number beside the
LED corresponds with the number beside the
network port on the rear of the server.