Setup guide

AirSpeed 5000 Server Hardware Components
4
n
ReadMe files are not in the box. They can be found online. You should always check online for
the most up-to-date release notes or ReadMe because the online version is updated whenever
new information becomes available. To view these online versions, visit the Knowledge Base at
www.avid.com/readme.
Inspecting Components for Damage
Once you have verified that all of your components have been shipped, you must verify that they
are not damaged.
To inspect components for damage:
1. Visually inspect all of the hardware components listed in the previous section to make sure
that none of them were damaged during shipment.
2. If you received a hardware component that was damaged, contact Avid Customer Support.
AirSpeed 5000 Server Hardware Components
The AirSpeed 5000 server ships with four on-board 1-Gb Ethernet ports. The Avid AirSpeed
5000 has two auto-sensing power supply modules that set the voltage automatically for either
100 V or 240 V at 50 to 60 Hz. For detailed specifications, see “Power Specifications” on
page 95.
®
The Avid AirSpeed 5000 server uses the Windows 7 Professional Service Pack 1 for Embedded
Systems operating system. The AirSpeed 5000 client operating systems that are supported in
your software release are listed in the latest AirSpeed 5000 ReadMe.
n
The Windows Product Key Certificate of Authenticity is located to the top-right-front corner of
the Avid AirSpeed 5000 server. Be sure to write down this number, and use it to activate your
Window 7 Operating System.