Product specifications

Working with Media Drives
120
n
If the Initialize Disk dialog box does not appear, you need to go to the diskpart.exe utility to
clean the previous configuration on Disk 1, by doing the following:
- Select Start > Run.
-Type diskpart, and press Enter. The Diskpart command window will open.
-Type list disk, and press Enter.
- At the DISKPART prompt, type select disk 1, and press Enter. The message “Disk 1 is
now the selected disk” appears.
- When disk 1 is selected, type clean, and press Enter. The message “DiskPart succeeded
in cleaning the disk.” appears.
- Select Computer Management > Disk Management, right click on Disk 1, and select
Initialize. The Initialize Disk dialog box will open.
29. In the Initialize Disk dialog box, do the following:
a. Uncheck Disk 2 (but leave Disk 1 checked)
b. Select the MBR (Master Boot Record) option.
c. Click OK.
30. Select Computer Management > Storage > Disk Management, right click on Disk 1, and
select New Simple Volume.
31. Click Next on the volume wizard screen.
The Volume Size dialog box opens. It should show 97 MB for the volume size.
32. Click Next.