Product specifications

Performing an Edit While Capture (EWC) with Auto Transfer

Performing an Edit While Capture (EWC) with Auto

Transfer

If you are in a Team configuration, you can use the Edit While Capture with Auto Transfer

workflow to enable the AirSpeed 5000 server to capture directly to your shared storage

workspace location configured in the AirSpeed 5000 Management Console. The metadata for

these clips will also be transferred to the location defined in the Master clip location (Team) field

in the AirSpeed 5000 Management Console.

Before you can perform an EWC with Auto Transfer, make sure that your system has been set up

using the Team Configuration (No Interplay with Shared storage).

Also, on the Inventory page in the AirSpeed 5000 Management Console, make sure of the

following:

• In the “Default Ingest Destination” field, under the Inventory tab, make sure that the

Destination template that is selected includes the workspace that you want to transfer the

media to.

• In the Master Clip Location (Team) field, select the ISIS workspace for which you want the

AAF file to be transferred to.

It is recommended that the location you select for the master clip location matches the location

you selected in the Workspace field of the Default Ingest Destination field in the Inventory tab of

the AirSpeed 5000 Management Console.

To perform an Edit While Capture (EWC) with auto transfer:

1. From the AirSpeed 5000 Remote Console, start a Record. For more information, see

“Recording Clips” on page 62.

2. Do one of the following to locate your clip:

t From Windows Explorer, locate the clip(s) you want to EWC, then drag/drop the .AAF

file into the Avid editor bin.

The clip will be imported and an in-progress clip will appear in the Avid editor bin. For

more information, see Step 4, then continue this procedure on Step 5.

t From the Avid Editor, select File > Import.