Product specifications

AirSpeed 5000 Installation and Configuration Checklist
27
Verifying your Remote Console is Configured Properly
Once you have configured your AirSpeed 5000 system, you should verify that it is configured
properly.
To verify your system is configured properly:
1. Record a clip and verify that the media files are copied to the destination workspace you
specified.
2. Depending on the mode you are configured as, do one of the following:
t For Standalone mode, from the AirSpeed 5000 Remote Console, select a clip, and drag
and drop it to your Editor bin. Launch the Transfer Status tool to make sure the clip is
transferred to the editor. When it is finished, verify that it plays.
t For Team mode, on the Editor, import the .aaf file and verify that it plays.
t For Interplay Production mode, navigate to the Interplay Transfer window, and drag the
clip from the Interplay Transfer window to the Editor bin. When it is finished, verify
that it plays.
3. Depending on the mode you are configured as, do one of the following
t For Standalone mode, locate the .mxf files in the \AvidMediaFiles\MXF\1 folder.
t For Team mode, locate the master clips\.aaf clips in the “master clip location” on your
Shared storage.
t For Interplay Production mode, locate the master clips in the Interplay Catalog, and, if
defined, the Project Path.
4. Edit the clip and Send To Playback (STP) to the AirSpeed 5000 server to verify the full
round-trip workflow.
In the case of Standalone mode on ingest, and all three modes on Send-To-Playback (STP),
the Transfer Status window will provide error messages in the event transfers do not
complete.