Product specifications

Standalone Transfer Engine Overview

For more information, see the following topic:

• Standalone Software Requirements

Configuration Requirements for AirSpeed 5000 Server

Before configuring the AirSpeed 5000 Remote Console for standalone environment, each

AirSpeed 5000 server that you want to connect to must have been configured with the following:

• Site-specific settings need to be applied for the AirSpeed 5000 to operate with a standalone

Transfer Engine.

• A site-specific host name/domain name must have been created for the AirSpeed 5000,

including an IP address and mask for the network interface.

•The E: drive must be shared with at least Read Only privileges.

Once these requirements are met, and you have installed all of the necessary hardware and

software for your site, you can configure the AirSpeed 5000 Remote Console for a Standalone

environment. For more information on specific tasks involved when configuring your AirSpeed

5000 with a Standalone Transfer Engine, see “AirSpeed 5000 Installation and Configuration

Checklist” on page 11.

Prior to proceeding with AirSpeed 5000 configuration, ensure that your AirSpeed 5000 is

installed and connected as described in the AirSpeed 5000 Setup Guide, and in the AirSpeed

5000 Administrator’s Guide.