User's Manual
Table Of Contents
- Eclipse ODU 600 5.8 GHz ISM Band Installation Manual Rev.001
- Copyright & Terms of Use
- Aviat Networks Support
- Eclipse Product Compliance Notes
- Contents
- Volume I: Introduction and Safety
- Volume II: System Overview
- Volume III: Installation
- Chapter 1. Introduction to Installation
- Chapter 2. ODU Installation
- Chapter 3. INU and INUe Installation
- INU/INUe Overview
- Installation Requirements
- Installation Procedure
- Plug-in Installation
- INU/INUe Cable Assemblies
- DAC Trib Connectors and Cables
- NMS Connectors and Cables
- NMS 10/100Base-T Connector
- Maintenance V.24 Connector
- Auxiliary and Alarm Connectors and Cables
- AUX Data Cable: Async, HD26 to Wirewrap, 2 m
- AUX Data Cable: Sync, HD26 to Wirewrap, 2 m
- AUX Data Cable: Async, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Sync, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Async, AUX HD26 to AUX HD26, 1 m
- AUX Data Cable: Sync, AUX HD26 to AUX HD26, 1 m
- AUX Alarm I/O Cable: HD15 to Wirewrap, 2 m or 5 m
ECLIPSE INSTALLATION MANUAL
Installing the ODU
ODU 600 is designed for direct-mounting onto a collar supplied with Aviat direct-fit
5.8 GHz antennas. It can also be installed with standard 5.8 GHz antennas using a
flex-waveguide remote-mount kit.
For single-antenna protected operation a coupler is available to support direct
mounting of the two ODUs to its antenna. The coupler may also be remote mounted,
with a flex-waveguide connecting the coupler to its antenna.
Refer to:
l Direct-Mounted ODU Installation on page 49
l Remote-Mounted ODUs on page 53
l Grounding the ODU on page 56
Direct-Mounted ODU Installation
Refer to:
l Overview on page 49
l Setting the Polarization on page 50
l Direct-Mount ODU Attachment Procedure on page 52
ODU installation kits include:
l An earth strap (2M) with lugs
l Tube of silicon grease
l Type-N angle adapter
Overview
ODU 600 attaches directly onto its antenna mount using four M10 SS bolts.
260-668066-004 AUGUST 2013 49