User's Manual

ECLIPSE INSTALLATION MANUAL
Auxiliary and Alarm Connectors and Cables
Data is included for AUX Plug-in auxiliary interfaces and cable-sets.
Alarm and Auxiliary cables should not terminate to equipment
outside the shelter or building. Use approved surge sup-
pr ession equi pment when connecti ng to un-protected external
inputs and outputs.
Refer to:
l
AUX Data Cable: Async, HD26 to Wirewrap, 2m on page 99
l
AUX Data Cable: Sync, HD26 to Wirewrap, 2m on page 100
l
AUX Data Cable: Async, HD26 to 3 X DB9, 1m on page 101
l
AUX Data Cable: Sync, HD26 to 3 X DB9, 1m on page 102
l AUX Data Cable: Async, AUX HD26 to AUX HD26, 1m on page 103
l
AUX Data Cable: Sync, AUX HD26 to AUX HD26, 1m on page 104
l
AUX Alarm I/O Cable: HD15 to Wirewrap, 2m or 5m on page 105
In this section, al l connector front views are cable-connector
views.
AUX Data Cable: Async, HD26 to Wirewrap, 2m
Part No: 037-579114-00
Figure 3-15. AUX HD26, 2M, Async, Front View
Table 3-13. Pin Descriptions and Color Code for Part # 037-579114-00
Pin No. Function Wire Color Code
TIA/E1A-562 DCE Direction
1 Output Green/Black
2 Output Black/Green
3 Aux RXD1 Output Black/Orange
4 Output Brown/Black
5 Aux TXD1 Input Orange/Black
6 Input Black/Brown
7 I/O Brown/White
260-668066-004 AUGUST 2013 99