User Manual

ManualsBrandsAviat Networks ManualsElectronicsPoint to Point Spread Spectrum Transceiver

100

MDR5800 User Manual

862-01881 Issue 6

Object ID Group Object Type Access Description

FEC circuitry.

1.3.6.1.4.1.1316.1.1.1.1.3.8 mdrmteBackgroundBlockErrors Counter read-only An errored block not occurring as part

of a SES.

1.3.6.1.4.1.1316.1.1.1.1.3.9

mdrmteErroredSecondsRatio DisplayString read-only The ratio of ES to total seconds in

available time during a fixed

measurement interval.

1.3.6.1.4.1.1316.1.1.1.1.3.10 mdrmteSeverelyErroredSecondsRatio DisplayString read-only The ratio of SES to total seconds in

available time during a fixed

measurement interval.

1.3.6.1.4.1.1316.1.1.1.1.3.11 mdrmteBackgroundBlockErrorRatio DisplayString read-only The ratio of Background Block Errors

(BBE) to total blocks in the available

time during a fixed measurement

interval. The count of total blocks

excludes all blocks during SESs.

1.3.6.1.4.1.1316.1.1.1.1.3.12 mdrmteResetAllG826 INTEGER write-only Reset all parameters associated with

G.826 measurements for the RF Link

1.3.6.1.4.1.1316.1.1.1.1.3.13 mdrmteCorrectedSymbols INTEGER read-only This parameter lists the number of

corrected symbols i.e. those corrected

by the FEC.

1.3.6.1.4.1.1316.1.1.1.1.4 mdrmteResetAllPerfData INTEGER write-only Reset all parameters associated with

Packet Error and G.826

measurements for the RF Link.

1.3.6.1.4.1.1316.1.1.1.2 mdrmteConfiguration

1.3.6.1.4.1.1316.1.1.1.2.1 MdrmtePayloadConf

1.3.6.1.4.1.1316.1.1.1.2.1.1 MdrmteDataRate INTEGER read-write Configure the tributary data interface

rate - either E1 or T1.

1.3.6.1.4.1.1316.1.1.1.2.1.2 mdrmteLineCodeType INTEGER read-write Defines the line code types for the

tributaries, either HDB3 or AMI for E1

tributaries or B8ZS or AMI for T1

tributaries.

1.3.6.1.4.1.1316.1.1.1.2.1.3 mdrmtePcTable SEQUENCE

1.3.6.1.4.1.1316.1.1.1.2.1.3.1 mdrmtePcEntry SYNTAX

1.3.6.1.4.1.1316.1.1.1.2.1.3.1.1 mdrmtePcIndex INTEGER

1.3.6.1.4.1.1316.1.1.1.2.1.3.1.2 mdrmtePcLabel DisplayString read-write E1/T1 Payload configuration tributary

label.

1.3.6.1.4.1.1316.1.1.1.2.1.3.1.3 mdrmtePcActive INTEGER read-write Defines whether tributaries are active

or inactive.

1.3.6.1.4.1.1316.1.1.1.2.2 mdrmteRFLinkConf

1.3.6.1.4.1.1316.1.1.1.2.2.1 mdrmteTxPower INTEGER read-write Allows setup of the output power

available at the diplexer port of the

Outdoor Unit.

1.3.6.1.4.1.1316.1.1.1.2.2.2 mdrmteBandPlan INTEGER read-write The MDR5800 Outdoor Units operate

in the 5.725 GHz to 5.850 GHz ISM

frequency band. The MDR5800 has

predefined frequency channel plans

(termed A, B, C and D). Refer to the

User's manual for details on defined

frequencies.