User Manual

MDR5800 User Manual

862-01881 Issue 6

10.2 The MIB Elements – OID (Object ID) DESCRIPTIONS

Object ID Group Object Type Access Description

1 Iso

1.3 Org

1.3.6 dod

1.3.6.1 internet

1.3.6.1.4 private

1.3.6.1.4.1 enterprises

1.3.6.1.4.1.1316 plessey

1.3.6.1.4.1.1316.1 products

1.3.6.1.4.1.1316.1.1 digitalradio

1.3.6.1.4.1.1316.1.1.1 mdrmte

1.3.6.1.4.1.1316.1.1.1.1 mdrmtePerformance

1.3.6.1.4.1.1316.1.1.1.1.1 mdrmtePayloadPerf

1.3.6.1.4.1.1316.1.1.1.1.1.1 mdrmtePpTable SEQUENCE

1.3.6.1.4.1.1316.1.1.1.1.1.1.1 mdrmtePpEntry SYNTAX

1.3.6.1.4.1.1316.1.1.1.1.1.1.1.1 mdrmtePpIndex INTEGER

1.3.6.1.4.1.1316.1.1.1.1.1.1.1.2 mdrmtePpLOS INTEGER read-only A Loss of Signal has been detected on

the input to a tributary - there are four,

one for each tributary.

1.3.6.1.4.1.1316.1.1.1.1.1.1.1.3 mdrmtePpAIS INTEGER read-only An Alarm Indication Signal has been

detected on the input to a tributary -

there are four, one for each tributary.

1.3.6.1.4.1.1316.1.1.1.1.2 mdrmteRFLinkPerf

1.3.6.1.4.1.1316.1.1.1.1.2.1 mdrmteCarrierDetect INTEGER read-only Indicates if a RF Carrier has been

detected by Outdoor Unit – if so, the

header in the RF Packet has been

identified as a potential valid packet -

note however, that it could be received

from another transmitter that uses the

same header format.

1.3.6.1.4.1.1316.1.1.1.1.2.2

MdrmteRSSI †

Gauge read-only A dBm value representative of the

received signal level. The value

detected is representative of the level

that would be measured should a CW

signal be input at the Outdoor Unit's

Diplexer RF Port - a Spread Spectrum

signal will appear to be 20 dB lower.

1.3.6.1.4.1.1316.1.1.1.1.2.3 mdrmteCurrentPER DisplayString read-only This is the current Packet Error Rate

and is based on the number of

† indicates Version 2.0 MIB additions/name changes