User Manual

MDR5800 User Manual

862-01881 Issue 6 Page 69

8.6 Ordering Information

Part No Model Number Description

651-03853ET1HB

651-03853ET1LB

MDR5800-ET1

MDR5800 Radio: Indoor Unit and High or Low Band

Outdoor Unit, Type-N RF output, high power output

for FCC and unregulated, Full E1/T1, 2Mbps or

1.5Mbps data interface

651-03853ET2HB

651-03853ET2LB

MDR5800-ET2

MDR5800 Radio: Indoor Unit and High or Low band

Outdoor Unit, Type-N RF output, high power output

for FCC and unregulated, Full 2xE1/2xT1, 2x2Mbps

or 2x1.5Mbps data interface

651-03853ET4HB

651-03853ET4LB

MDR5800-ET4

MDR5800 Radio: Indoor Unit and High or Low band

Outdoor Unit, Type-N RF output, high power output

for FCC and unregulated, Full 4xE1/4xT1, 4x2Mbps

or 4x1.5Mbps data interface

MDR5800 operates from 21-56VDC, optional 110-220VAC power supply available below.

A complete link requires two radios, one must be High Band (HB) and the other a Low Band (LB).

Accessories & Upgrades

Part Number Description

651-03864 Bench Power Supply 110-220VAC to 48VDC

651-03865 MDR 5800 Upgrade 1xE1/T1 to 2xE1/T1

651-03866 MDR 5800 Upgrade 2xE1/T1 to 4xE1/T1

651-03867 MDR 5800 Upgrade 1xE1/T1 to 4xE1/T1

The MDR5800 uses standard CAT5 Ethernet cable and RJ-45 connectors for connecting the

Indoor Unit to the Outdoor Unit. A two-wire power cable is also required between the Indoor Unit

and the Outdoor Unit. Note Screened Cat5 cable and UV resistant cables are recommended for

long term outdoor use.