User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 96
Object ID Group Object Type Acce
ss
Description
1.3.6.1.4.1.1316.1.1.1.1.3.9
mdrmteErroredSecondsRatio DisplayString read-
only
The ratio of ES to total seconds
in available time during a fixed
measurement interval.
1.3.6.1.4.1.1316.1.1.1.1.3.10 mdrmteSeverelyErroredSecondsRatio DisplayString read-
only
The ratio of SES to total seconds
in available time during a fixed
measurement interval.
1.3.6.1.4.1.1316.1.1.1.1.3.11 mdrmteBackgroundBlockErrorRatio DisplayString read-
only
The ratio of Background Block
Errors (BBE) to total blocks in the
available time during a fixed
measurement interval. The count
of total blocks excludes all blocks
during SESs.
1.3.6.1.4.1.1316.1.1.1.1.3.12 Deprecated2 INTEGER write
-only
Deprecated
1.3.6.1.4.1.1316.1.1.1.1.3.13 mdrmteCorrectedSymbols INTEGER read-
only
This parameter lists the number
of corrected symbols i.e. those
corrected by the FEC.
1.3.6.1.4.1.1316.1.1.1.1.4
Counters†
1.3.6.1.4.1.1316.1.1.1.1.4.1
mdrmteLostEthRxPkts†
COUNTER read-
only
Indicates the total number of
times an ethernet packet could
not be buffered
1.3.6.1.4.1.1316.1.1.1.1.4.2
MdrmteLostLinkRxPkts†
COUNTER read-
only
Indicates the total number of
times a link packet could not be
buffered
1.3.6.1.4.1.1316.1.1.1.1.4.3
MdrmteLostWaySideTxPkts†
COUNTER read-
only
Indicates the total number of
times a wayside packet could not
be buffered
1.3.6.1.4.1.1316.1.1.1.1.4.4
mdrmteEtherRetries†
COUNTER read-
only
Indicates the total number of
(collisions) packets that were
retransmitted on Ethernet
1.3.6.1.4.1.1316.1.1.1.1.4.5
mdrmteScc1FullCnt†
COUNTER read-
only
Indicates the total number of
times SCC1 was full to capacity
1.3.6.1.4.1.1316.1.1.1.1.4.6
mdrmteScc2FullCnt†
COUNTER read-
only
Indicates the total number of
times SCC2 was full to capacity
1.3.6.1.4.1.1316.1.1.1.1.4.7
mdrmteScc1UnderrunCnt†
COUNTER read-
only
Indicates the total number of
times SCC1 ran out of BDs
1.3.6.1.4.1.1316.1.1.1.1.4.8
mdrmteScc2UnderrunCnt†
COUNTER read-
only
Indicates the total number of
times SCC2 ran out of BDs
1.3.6.1.4.1.1316.1.1.1.1.4.9
mdrmteScc2RxBdAbortCnt†
COUNTER read-
only
Indicates the total number of
times SCC2 received an aborted
frame
1.3.6.1.4.1.1316.1.1.1.1.4.10
mdrmteScc2RxBdNonOctCnt†
COUNTER read-
only
Indicates the total number of
times SCC2 received a Non octet
aligned frame
1.3.6.1.4.1.1316.1.1.1.1.4.11
mdrmteScc2RxBdCrcCnt†
COUNTER read-
only
Indicates the total number of
times SCC2 received
1.3.6.1.4.1.1316.1.1.1.1.5 mdrmteResetAllPerfData INTEGER write
-only
Reset all parameters associated
with Packet Error and G.826
measurements for the RF Link.
1.3.6.1.4.1.1316.1.1.1.2 mdrmteConfiguration
1.3.6.1.4.1.1316.1.1.1.2.1 MdrmtePayloadConf
1.3.6.1.4.1.1316.1.1.1.2.1.1 MdrmteDataRate INTEGER read-
write
Configure the tributary data
interface rate - either E1 or T1.
1.3.6.1.4.1.1316.1.1.1.2.1.2 mdrmteLineCodeType INTEGER read-
write
Defines the line code types for
the tributaries, either HDB3 or
AMI for E1 tributaries or B8ZS or
AMI for T1 tributaries.
1.3.6.1.4.1.1316.1.1.1.2.1.3 mdrmtePcTable SEQUENCE
1.3.6.1.4.1.1316.1.1.1.2.1.3.1 mdrmtePcEntry SYNTAX
1.3.6.1.4.1.1316.1.1.1.2.1.3.1.1 mdrmtePcIndex INTEGER