User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 95
Object ID Group Object Type Acce
ss
Description
A GH filter is applied to the
calculation. This GH filter
functions as a weighted average
where the GH Average Filter
Fraction is the proportion of the
instantaneous PER used in the
current seconds calculation. The
remainder (1-Fraction(0.7)) is
taken from the previous 250 milli-
second calculation.
1.3.6.1.4.1.1316.1.1.1.1.2.12 mdrmteMajorPERExceeded INTEGER read-
only
This parameter indicates if the
major packet (uncorrectable by
FEC) error rate has been
exceeded based on the defined
threshold listed in the
mdrmteFAULT -
mdrmtePerfTrapThreshold group.
1.3.6.1.4.1.1316.1.1.1.1.2.13 mdrmteCriticalPERExceeded INTEGER read-
only
This parameter indicates if the
critical packet (uncorrectable by
FEC) error rate has been
exceeded based on the defined
threshold listed in the
mdrmteFAULT -
mdrmtePerfTrapThreshold group.
1.3.6.1.4.1.1316.1.1.1.1.2.14 mdrmtePrevParamsRestored INTEGER read-
only
Indicates if “auto recovery” for the
Outdoor Unit settings had to be
invoked due to an unsuitable
choice of frequency or power
settings for the RF link.
1.3.6.1.4.1.1316.1.1.1.1.2.15 Deprecated1 INTEGER write
-only
Deprecated
1.3.6.1.4.1.1316.1.1.1.1.3 mdrmteG826
1.3.6.1.4.1.1316.1.1.1.1.3.1 mdrmteStatus INTEGER read-
only
Indicates if 'G.826-like' errored,
severely errored and unavailable
conditions have been monitored
on the RF Link.
1.3.6.1.4.1.1316.1.1.1.1.3.2 mdrmteTotalSeconds Counter read-
only
Indicates the total number of
seconds, both available and
unavailable.
1.3.6.1.4.1.1316.1.1.1.1.3.3 mdrmteAvailableSeconds Counter read-
only
A period of unavailable time
begins at the onset of ten
consecutive SES events. These
ten seconds are considered to be
part of unavailable time. A new
period of available time begins at
the onset of ten consecutive non-
SES events. These ten seconds
are considered to be part of
available time.
1.3.6.1.4.1.1316.1.1.1.1.3.4 mdrmteUnavailableSeconds Counter read-
only
A period of unavailable time
begins at the onset of ten
consecutive SES events. These
ten seconds are considered to be
part of unavailable time. A new
period of available time begins at
the onset of ten consecutive non-
SES events. These ten seconds
are considered to be part of
available time.
1.3.6.1.4.1.1316.1.1.1.1.3.5 mdrmteErroredSeconds Counter read-
only
A one second period with one or
more errored packets
(uncorrectable packets) or at
least one defect.
1.3.6.1.4.1.1316.1.1.1.1.3.6 mdrmteSeverelyErroredSeconds Counter read-
only
A one-second period which
contains > 30% errored blocks or
at least one defect. SES is a
subset of ES.
1.3.6.1.4.1.1316.1.1.1.1.3.7 mdrmteErroredBlocks Counter read-
only
A packet that has been identified
as containing uncorrectable bits
by the FEC circuitry.
1.3.6.1.4.1.1316.1.1.1.1.3.8 mdrmteBackgroundBlockErrors Counter read-
only
An errored block not occurring as
part of a SES.