User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 76
9 APPENDIX A: ELEMENT MANAGER PORT POINT-TO-POINT
SERIAL COMMUNICATIONS SETUP
This appendix summarises how to set up a network connection (using PPP) between a computer and the
MDR Indoor Unit’s Element Manager port. It lists how the connection can be setup and configured to allow
data transfer and SNMP-based control of the MDR Indoor Unit.
Note : For both NT and Win 95 or 98 machines, check that a
Network Adapter is installed.
The following screen capture shows the Windows help available to assist setting up a
serial comms network adapter.
9.1 Adding a Modem : Windows NT
1. When working with a PC running a Windows NT, add a modem using the following
screen as a guideline.