User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 5
3.5.1 Setting the Transmitted Power Levels 24
3.5.2 Frequency Multiplexing 24
3.5.3 Antenna Isolation 24
4 INSTALLATION 26
4.1 Customer Furnished Tools and Equipment 27
4.2 Indoor Unit 28
4.2.1 Introduction 28
4.2.2 Installing the Indoor Unit in a Rack 28
4.2.3 Connecting a DC Power Supply 29
4.2.4 Balanced Payload Data 30
4.2.5 Unbalanced Payload Data 31
4.2.6 Connecting Auxiliary In/Out (Optional) 31
4.2.7 Connecting the Service (Wayside) Serial Channel (Optional) 32
4.2.8 Connecting the Element Manager Port 32
4.3 Outdoor Unit 33
4.3.1 MDR Outdoor Unit 33
4.4 Interconnection Cable Installation 34
4.4.1 INTERCONNECTION CABLE WIRING DESCRIPTION 35
5 ANTENNA ALIGNMENT AND SOFTWARE SETUP 37
5.1 Installation Equipment Required 37
5.2 Information Required 37
5.3 Antenna Alignment 37
5.3.1 Introduction 37
5.3.2 Alignment Procedure 38
5.3.3 Set Transmitted Power Level 39
5.4 Software Setup 40
5.5 Functional Test 40
5.5.1 Link Bit Error Rate Performance Test 40
5.6 MDR Installation Record 41
5.7 MDR Test Record 42
6 NMS SOFTWARE 44
6.1 Introduction to the Network Management System 44
6.2 General Information 44