User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 48
6.4 NMS Menus
6.4.1 Main Screen Menus
The following pull-down menus are available from the Main menu:
Menu Sub-item Result
File Exit Exit from NMS.
Communications Allows setup of which communications port is used
on the PC or Laptop for communication with the
Indoor Unit via the front panel Element Manager
Serial Port.
Local Trib Code
It is possible to purchase upgrades for E1/T1 Indoor
Units (upgrades to 2E1/T1 or 4E1/T1). The user
contacts the factory and provides the Indoor Unit Bar
Code number details. The factory then supplies a
“Tributary Code”, unique to the Indoor Unit, which is
entered using the MIB (Version 1 & 2 products) or
using the NMS (Version 2 product).
Remote Trib Code See above.
Local User
Configuration
Allows the user to set the access control settings for
the local station equipment to allow the user to log on
as an ‘Administrator’ with full read/write configuration
access or with ‘Read-only’ access. (Note: This
option is only available if the IU firmware has been
supplied with secure-features activated – the default
is NOT to have this feature activated).
Options
Remote User
Configuration
Allows the user to set the access control settings for
the remote station equipment to allow the user to log
on as an ‘Administrator’ with full read/write
configuration access or with ‘Read-only’ access.
(Note: This option is only available if the IU firmware
has been supplied with secure-features activated –
the default is NOT to have this feature activated).
Spectrum
Analyzer
Allows the user to examine the RF spectrum using a
RSSI (received signal strength indicator) value
measured in the Outdoor Unit. If interference exists,
this feature allows the user to examine the spectrum
and decide where to set the transmit and receive
frequencies for the local and remote stations.
6.4.1.1 Exiting from the NMS : File/Exit
You can exit from the NMS as follows:
Click on the Exit option from the File pull-down menu on the Main screen.