User Manual

MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 104
Object ID Group Object Type Acce
ss
Description
1.3.6.1.4.1.1316.1.1.1.4.15
mdrmteBridgeEnable†
INTEGER read-
write
Determines if the system is to act
as a transparent bridge for all
Ethernet packets received.
1.3.6.1.4.1.1316.1.1.1.4.16
mdrmteEthernetFullDuplex†
INTEGER read-
write
Determines if the Ethernet
interface is full- or half-duplex.
1.3.6.1.4.1.1316.1.1.1.5 mdrmteRelayOutputs
1.3.6.1.4.1.1316.1.1.1.5.1 mdrmteRelay1
1.3.6.1.4.1.1316.1.1.1.5.1.1 mdrmteRelay1Label DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay, most probably in terms
of the equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.1.2 mdrmteRelay1OpenStateLabel DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay in the open state, most
probably in terms of the
equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.1.3 mdrmteRelay1ClosedStateLabel DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay in the closed state, most
probably in terms of the
equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.1.4 mdrmteRelay1Reserved INTEGER
1.3.6.1.4.1.1316.1.1.1.5.1.5 mdrmteRelay1CurrentState INTEGER read-
write
The current state of the relay.
Used to activate/deactivate a
relay.
1.3.6.1.4.1.1316.1.1.1.5.1.6 mdrmteRelay1ScriptTable SEQUENCE
1.3.6.1.4.1.1316.1.1.1.5.1.6.1 mdrmteRelay1ScriptEntry SYNTAX
1.3.6.1.4.1.1316.1.1.1.5.1.6.1.1
mdrmteRelay1ScriptIndex†
6
INTEGER
1.3.6.1.4.1.1316.1.1.1.5.1.6.1.2 mdrmteRelay1ScriptID INTEGER read-
write
Defines which of the listed
alarms can cause a relay to
activate.
1.3.6.1.4.1.1316.1.1.1.5.1.6.1.3 mdrmteRelay1ScriptActiveLocal INTEGER read-
write
Defines if the script is active or
not for local relay activation.
1.3.6.1.4.1.1316.1.1.1.5.1.6.1.4 mdrmteRelay1ScriptActiveRemote INTEGER read-
write
Defines if the script is active or
not for remote relay activation.
1.3.6.1.4.1.1316.1.1.1.5.2 mdrmteRelay2
1.3.6.1.4.1.1316.1.1.1.5.2.1 mdrmteRelay2Label DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay, most probably in terms
of the equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.2.2 mdrmteRelay2OpenStateLabel DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay in the open state, most
probably in terms of the
equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.2.3 mdrmteRelay2ClosedStateLabel DisplayString read-
write
A short, descriptive name
indicating the primary function of
the relay in the closed state, most
probably in terms of the
equipment connected to it.
1.3.6.1.4.1.1316.1.1.1.5.2.4 mdrmteRelay2Reserved INTEGER
1.3.6.1.4.1.1316.1.1.1.5.2.5 mdrmteRelay2CurrentState INTEGER read-
write
The current state of the relay.
Used to activate/deactivate a
relay.
1.3.6.1.4.1.1316.1.1.1.5.2.6 mdrmteRelay2ScriptTable SEQUENCE
1.3.6.1.4.1.1316.1.1.1.5.2.6.1 mdrmteRelay2ScriptEntry SYNTAX
1.3.6.1.4.1.1316.1.1.1.5.2.6.1.1 mdrmteRelay2ScriptIndex INTEGER
1.3.6.1.4.1.1316.1.1.1.5.2.6.1.2 mdrmteRelay2ScriptID INTEGER read-
write
Defines which of the listed
alarms can cause a relay to
activate.
6
Relay scripting is not activated in Versions 1.00 & 2.00, 01, 02 of the IU firmware release.