User Manual
MDR2400 and MDR5800 User Manual
862-01881 Issue 8 Page 103
Object ID Group Object Type Acce
ss
Description
1.3.6.1.4.1.1316.1.1.1.4.6.1.1 mdrmteUserIndex INTEGER
1.3.6.1.4.1.1316.1.1.1.4.6.1.2 mdrmteUserName
5
DisplayString read-
write
If the firmware is built with the
security feature switched on,
users can log into an IU. This
entry allows the user to enter a
password associated with their
sign-on name.
1.3.6.1.4.1.1316.1.1.1.4.6.1.3 mdrmteUserPassword DisplayString write
-only
If the firmware is built with the
security feature switched on,
users can log into an IU – this
entry allows password entry.
1.3.6.1.4.1.1316.1.1.1.4.6.1.4 mdrmteUserAccessLevel INTEGER read-
write
If the firmware is built with the
security feature switched on,
users can log into an IU. The
access entries that are used are
“read_only” and “administrator”.
An administrator can add and
delete new users, assign
passwords, initialise NOVRAM
via SNMP, enter tributary codes,
adjust FTP server status, initiate
new flash updates after an FTP
upload. Read_only prevents the
ability of the user to adjust the
SETable variables in the MIB.
1.3.6.1.4.1.1316.1.1.1.4.6.1.5 mdrmteUserActive INTEGER read-
write
Indicates if a user is active or not
based on password entry.
1.3.6.1.4.1.1316.1.1.1.4.6.1.6 mdrmteUserAdd INTEGER write
-only
In security-enabled mode, allows
an administrator to add users.
1.3.6.1.4.1.1316.1.1.1.4.6.1.7 mdrmteUserDelete INTEGER write
-only
In security-enabled mode, allows
an administrator to delete users.
1.3.6.1.4.1.1316.1.1.1.4.7 mdrmteRFLinkIPAddress IpAddress read-
write
PPP IP address for the RF Link.
The user need not adjust this
parameter.
1.3.6.1.4.1.1316.1.1.1.4.8 mdrmteRFLinkNetMask IpAddress read-
write
PPP IP netmask for the RF Link.
The user need not adjust this
parameter.
1.3.6.1.4.1.1316.1.1.1.4.9 mdrmteRemoteIPAddress IpAddress read-
write
Default PPP IP address for the
other end of the RF link.
1.3.6.1.4.1.1316.1.1.1.4.10 MdrmteElementManagerIPAddress IpAddress read-
write
Default PPP IP address for the
the element manager port -
10.13.1.1 for a 'local IU' and
10.12.1.1 for a 'remote IU'.
1.3.6.1.4.1.1316.1.1.1.4.11 MdrmteElementManagerNetMask IpAddress read-
write
IP netmask for the Element
Manager PPP port.
1.3.6.1.4.1.1316.1.1.1.4.12 MdrmteIPNegotiable INTEGER read-
write
Determines if the local PPP IP
address is negotiable or not -
does not need to be adjusted by
the user.
1.3.6.1.4.1.1316.1.1.1.4.13 MdrmtePPPisDefaultRoute INTEGER read-
write
Determines if PPP interface is
the default route - does not need
to be adjusted by the user.
1.3.6.1.4.1.1316.1.1.1.4.14 MdrmteStaticRouteTable SEQUENCE
1.3.6.1.4.1.1316.1.1.1.4.14.1 MdrmteStaticRouteEntry SYNTAX
1.3.6.1.4.1.1316.1.1.1.4.14.1.1 MdrmteStaticRouteIndex INTEGER
1.3.6.1.4.1.1316.1.1.1.4.14.1.2 MdrmteStaticRouteIPAddressDestinatio
n
IpAddress read-
write
Ultimate destination.
1.3.6.1.4.1.1316.1.1.1.4.14.1.3 MdrmteStaticRouteIPAddressMask IpAddress read-
write
net mask, 255.255.255.255 if
destination is host address.
1.3.6.1.4.1.1316.1.1.1.4.14.1.4 mdrmteStaticRouteIPAddressNextHop IpAddress read-
write
Where to forward to.
1.3.6.1.4.1.1316.1.1.1.4.14.1.5 mdrmteStaticRouteInterfaceForNextHop INTEGER read-
write
Interface (net) for nexthop.
5
The default build for firmware DOES NOT include a SECURE LOGIN option.