User's Manual
Table Of Contents
- Eclipse Installation Manual for 5.8 GHz Unlicensed Band Rev.003
- Copyright & Terms of Use
- Aviat Networks Support
- Eclipse Product Compliance Notes
- Contents
- Volume I: Introduction and Safety
- Volume II: System Overview
- Volume III: Installation
- Chapter 1. Introduction to Eclipse Installation
- Chapter 2. IRU 600 Installation
- Chapter 3. INU and INUe Installation
- INU/INUe Overview
- Installation Requirements
- Installation Procedure
- Plug-in Installation
- INU/INUe Cable Assemblies
- DAC Trib Connectors and Cables
- NMS Connectors and Cables
- NMS 10/100Base-T Connector
- Maintenance V.24 Connector
- Auxiliary and Alarm Connectors and Cables
- AUX Data Cable: Async, HD26 to Wirewrap, 2 m
- AUX Data Cable: Sync, HD26 to Wirewrap, 2 m
- AUX Data Cable: Async, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Sync, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Async, AUX HD26 to AUX HD26, 1 m
- AUX Data Cable: Sync, AUX HD26 to AUX HD26, 1 m
- AUX Alarm I/O Cable: HD15 to Wirewrap, 2 m or 5 m
VOLUME III, CHAPTER 3, INU AND INUE INSTALLATION
Power Line Filter Option
An external DC power line filter option is available and must be installed with an
INU/INUe for NEBS compliance. It ensures Eclipse meets EMI requirements spec-
ified within Telcordia GR-1089-CORE, Issue 4, June 2006.
It is IRU tall and 140mm wide (5.5”), and is supplied as a kitset comprising the
filter unit, bracket for left or right side rack mounting, and a short 2W2 to 2W2 cable
for connecting the filter unit to the NCC or NPC -48 Vdc inputs.
Where an NPC is fitted, two filter units are required, one for the NCC, the other for
the NPC.
The standard power cable supplied with an INU or NPC is re-used as the power
input cable for the filter unit.
Figure 3-4. Power Line Filter with Bracket
68 AVIAT NETWORKS