User's Manual
Table Of Contents
- Eclipse Installation Manual for 5.8 GHz Unlicensed Band Rev.003
- Copyright & Terms of Use
- Aviat Networks Support
- Eclipse Product Compliance Notes
- Contents
- Volume I: Introduction and Safety
- Volume II: System Overview
- Volume III: Installation
- Chapter 1. Introduction to Eclipse Installation
- Chapter 2. IRU 600 Installation
- Chapter 3. INU and INUe Installation
- INU/INUe Overview
- Installation Requirements
- Installation Procedure
- Plug-in Installation
- INU/INUe Cable Assemblies
- DAC Trib Connectors and Cables
- NMS Connectors and Cables
- NMS 10/100Base-T Connector
- Maintenance V.24 Connector
- Auxiliary and Alarm Connectors and Cables
- AUX Data Cable: Async, HD26 to Wirewrap, 2 m
- AUX Data Cable: Sync, HD26 to Wirewrap, 2 m
- AUX Data Cable: Async, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Sync, HD26 to 3 X DB9, 1 m
- AUX Data Cable: Async, AUX HD26 to AUX HD26, 1 m
- AUX Data Cable: Sync, AUX HD26 to AUX HD26, 1 m
- AUX Alarm I/O Cable: HD15 to Wirewrap, 2 m or 5 m
ECLIPSE INSTALLATION MANUAL
Chapter 2. IRU 600 Installation
Before commissioni ng an IRU 600 and compani on INU,
its antenna, wavegui de, and wav egui de pr essuri zati on
equi pment must be i nstalled accordi ng to man-
ufactur er’s instructions.
For an overview of IRU 600 features and function, see Eclipse IRU 600 on page 31.
For information on installing an INU, see INU and INUe Installation on page 59.
For guidance on installing antennas, waveguide and pressurization equipment, see
the Best Practices Guide from Aviat Networks.
IRU 600 (v1), IRU 600v2 and IRU 600v3 RFU Sparing Compatibility
For information on sparing compatibility see IRU 600 Compatibility on page 32.
260-668066-001 OCTOBER 2012 49