User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 129
K.3 RF Connection
1. The RF port is an N-type female connector on the front panel.
2. The N-Type connector is used to connect to the antenna, typically using coaxial
transmission line or flexible wave guide via a launch/N-type adaptor.
3. Elliptical wave guide is recommended for longer feeder runs to minimize losses.
4. Also refer to 4.3.1.
K.4 Interconnection Cable Installation
Refer to 4.4 and follow the steps to install the interconnection cables between Indoor
(Digital) Unit and Indoor (RF) Unit. All connections to the Indoor (Digital) Unit are on
the front panel.