User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 103
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.5.3 mdrmteRelayScriptServerPort INTEGER read-write
This specifies the IP port
number to be used by the
Relay scripting server
.1316.1.1.1.5.4 mdrmteRelayClientComms INTEGER read-only
This indicates the state of
the Relay Scripting client-
server socket.
.1316.1.1.1.5.5 mdrmteRelayScriptRemotePollTime INTEGER read-write
This specifies the poll
interval for remote
scripting updates in
seconds.
.1316.1.1.1.5.6 mdrmteActiveEventsTable SEQUENCE not-accessible
Shows all the currently
active events (even if
scripting on the event is
disabled.)
.1316.1.1.1.5.6.1 mdrmteActiveEventsEntry
MdrmteActiveEvents
Entry not-accessible
.1316.1.1.1.5.6.1.1 mdrmteActiveEventsIndex INTEGER read-only Index
.1316.1.1.1.5.6.1.2 mdrmteActiveEventsLabel INTEGER read-only Name of the event
.1316.1.1.1.5.6.1.3 mdrmteActiveEvents INTEGER read-only
Defines whether events
are active or inactive
.1316.1.1.1.5.6.1.4 mdrmteActiveRemoteEvents INTEGER read-only
Defines whether remote
events are active or
inactive
.1316.1.1.1.5.7 mdrmteRelayScriptingEnable INTEGER read-write
This enables or disables
relay scripting. Both near
and far units must have
the same setting.
.1316.1.1.1.6.1 mdrmteOptoInput1
.1316.1.1.1.6.1.1 mdrmteOptoInput1Label DisplayString read-write
A short, descriptive name
indicating the primary
funtion of the contact-
closure input
.1316.1.1.1.6.1.2 mdrmteOptoInput1State INTEGER read-only
Indicates if the opto input
contact-closure input is
active (on) or not (off)
.1316.1.1.1.6.2 mdrmteOptoInput2
.1316.1.1.1.6.2.1 mdrmteOptoInput2Label DisplayString read-write
A short, descriptive name
indicating the primary
funtion of the contact-
closure input
.1316.1.1.1.6.2.2 mdrmteOptoInput2State INTEGER read-only
Indicates if the opto input
contact-closure input is
active (on) or not (off)