User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 99
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.3.2.11 mdrmteOuTemperature DisplayString read-only
This is the measured
temperature in the Out-
door unit (if supported) in
degrees Celcius
.1316.1.1.1.3.2.12 mdrmteOuEtherPhy INTEGER read-only
Identifies pass/fail status
of the ethernet phy to the
RFU
.1316.1.1.1.3.2.13 mdrmteEEprom INTEGER read-only
Identifies pass/fail status
of the Digital Indoor Unit's
EEPROM
.1316.1.1.1.3.3 mdrmteTrapManagement
.1316.1.1.1.3.3.1 mdrmteTrapFilter INTEGER read-write
Alarms within the MDR
product are classfied as
critical, major, minor or
informational. The trap
.1316.1.1.1.3.3.2 mdrmteNumberTrapManagers INTEGER read-only
This entry shows the
number of trap managers
allowed
.1316.1.1.1.3.3.3 mdrmteTrapManagerTable SEQUENCE not-accessible
.1316.1.1.1.3.3.3.1 mdrmteTrapManagerEntry
MdrmteTrapManager
Entry not-accessible
.1316.1.1.1.3.3.3.1.1 mdrmteTrapManagerIndex INTEGER read-only
.1316.1.1.1.3.3.3.1.2 mdrmteTrapManagerIP IpAddress read-write
This is the IP address of
the management station
that is set up to detect and
act upon
.1316.1.1.1.3.3.3.1.3 mdrmteTrapManagerComm DisplayString read-write
This is the 'SNMP
community name' used for
dispatch of traps
.1316.1.1.1.3.3.3.1.4 mdrmteTrapManagerActive INTEGER read-write
Defines whether a
particular Trap Manager is
active or inactive
.1316.1.1.1.3.4 mdrmtePerfTrapThreshold
.1316.1.1.1.3.4.1 mdrmteMinorPERThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Minor PER (Packet
Error Rate)
.1316.1.1.1.3.4.2 mdrmteMajorPERThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Major PER (Packet
Error Rate)
.1316.1.1.1.3.4.3 mdrmteCriticalPERThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Critical PER (Packet
Error Rate)
.1316.1.1.1.3.4.4 mdrmteErrSecRatioThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Errored Second Ratio
.1316.1.1.1.3.4.5 mdrmteSevErrSecRatioThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Severely Errored
Second Ratio
.1316.1.1.1.3.4.6 mdrmteBkgrndBlkErrRatioThreshold DisplayString read-write
Defines the threshold used
as a checking criterion for
the Background Block
Error Ratio
.1316.1.1.1.3.5 mdrmteEventLogTable SEQUENCE not-accessible
.1316.1.1.1.3.5.1 mdrmteEventLogEntry
MdrmteEventLogEntr
y not-accessible
.1316.1.1.1.3.5.1.1 mdrmteEventIndex INTEGER read-only
.1316.1.1.1.3.5.1.2 mdrmteEventDate DisplayString read-only
Lists the date on which the
event occurred
.1316.1.1.1.3.5.1.3 mdrmteEventTime DisplayString read-only
Lists the time when the
event occurred
.1316.1.1.1.3.5.1.4 mdrmteEventType INTEGER read-only
Lists the type of event -
informational, minor, major
or critical
.1316.1.1.1.3.5.1.5 mdrmteEventDescription DisplayString read-only
Textual description of the
logged event