User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 93
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.1.4.29 mdrmteIdma2InUse Counter read-only
Indicates the total number
of times IDMA controller 2
was already in use.
memcpy() was used
instead.
.1316.1.1.1.1.4.30 mdrmteLinkKnQueueFull Counter read-only
Indicates the total number
of times a Kwiknet frame
was deferred due to a lack
of space in the AMX link
queue.
.1316.1.1.1.1.4.31 mdrmteLinkTxBdsFull Counter read-only
Indicates the total number
of times the Rf Link Tx BD
queue was too full to insert
data
.1316.1.1.1.1.4.32 mdrmteKnEtherFramesLost Counter read-only
Indicates the total number
of times the Kwiknet
queue was too full to insert
Ethernet data
.1316.1.1.1.1.4.33 mdrmteKnCraftFramesLost Counter read-only
Indicates the total number
of times the Kwiknet
queue was too full to insert
SCC4 data
.1316.1.1.1.1.4.34 mdrmteKnLinkFramesLost Counter read-only
Indicates the total number
of times the Kwiknet
queue was too full to insert
SCC2 data
.1316.1.1.1.1.4.35 mdrmteKnFramesTooShort Counter read-only
Indicates the total number
of times the Kwiknet buffer
allocated was too short.
.1316.1.1.1.1.4.36 mdrmteLinkVoidFrames Counter read-only
Indicates the total number
of overwritten frames
received on the wireless
PPP link
.1316.1.1.1.1.4.37 mdrmteLinkRxPauseCnt Counter read-only
Indicates the total number
of times the link receiver
was disabled due to lack
of buffers.
.1316.1.1.1.1.4.38 mdrmteRelayServerRestarts Counter read-only
Indicates the total number
of times the Relay
scripting server restarted.
.1316.1.1.1.1.4.39 mdrmteRelayClientRestarts Counter read-only
Indicates the total number
of times the Relay
scripting client restarted.
.1316.1.1.1.1.4.40 mdrmteMuxEtherErrors Counter read-only
The number of Ethernet
errors reported by the
FPGA
.1316.1.1.1.1.4.41 mdrmteMuxBlockErrors Counter read-only
The number of Block
errors reported by the
FPGA
.1316.1.1.1.1.4.42 mdrmteOuRxEtherCRCerrors Counter read-only
The number of Ethernet
errors reported by the
FPGA on the RFU
.1316.1.1.1.1.5 mdrmteResetAllPerfData INTEGER write-only
Reset all parameters
associated with Packet
Error and G.826
measurements for the RF
Link
.1316.1.1.1.2.1 mdrmtePayloadConf
.1316.1.1.1.2.1.1 mdrmteDataRate INTEGER read-write
Configure the tributary
data interface rate - either
E1 or T1
.1316.1.1.1.2.1.2 mdrmteLineCodeType INTEGER read-only Deprecated
.1316.1.1.1.2.1.3 mdrmtePcTable SEQUENCE not-accessible
.1316.1.1.1.2.1.3.1 mdrmtePcEntry MdrmtePcEntry not-accessible
.1316.1.1.1.2.1.3.1.1 mdrmtePcIndex INTEGER read-only
.1316.1.1.1.2.1.3.1.2 mdrmtePcLabel DisplayString read-write
E1/T1 Payload
configuration tributary
label
.1316.1.1.1.2.1.3.1.3 mdrmtePcActive INTEGER read-write
Defines whether tributaries
are active or inactive
.1316.1.1.1.2.1.4 mdrmteLineEncodingTable SEQUENCE not-accessible