User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 90
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.1.2.3 mdrmteCurrentPER DisplayString read-only
This is the current Packet
Error Rate and is based
on the number of
uncorrectable
packets/blocks being
detected by the FEC
(Forward Error Correction)
circuitry within the Digital
Indoor Unit (based of the
number of errored packets
divided by the total
number of packets
transmitted in a
measurement period of
250msec)
.1316.1.1.1.1.2.4 mdrmteMaximizedPER DisplayString read-only
This is the maximum
Packet Error Rate
detected during the last
measurement period,
based number of
maximum number
.1316.1.1.1.1.2.5 mdrmteLinkUnavailable INTEGER read-only
Based on G.826 criteria,
this MIB element indicates
RF Link Availability/Non-
availability
.1316.1.1.1.1.2.6 mdrmteFrameUnlock INTEGER read-only
The data that is
transmitted across the RF
Link is conveyed in a
frame, compiled within
.1316.1.1.1.1.2.7 mdrmteRemoteFrameUnlock INTEGER read-only
Frame-lock
(mdrmteFrameUnlock) as
seen by the other end of
the link is fed back here.
.1316.1.1.1.1.2.8 mdrmteErrSecRatioExceeded INTEGER read-only
The ESR is a ratio of the
number of Errored
seconds (one second
periods within
.1316.1.1.1.1.2.9 mdrmteSevErrSecRatioExceeded INTEGER read-only
The SESR is a ratio of the
number of Severely
Errored seconds (one
second periods within
.1316.1.1.1.1.2.10 mdrmteBkgrndBlkErrRatioExceeded INTEGER read-only
The BBER is a ratio of the
number of uncorrectable
blocks/packets received
.1316.1.1.1.1.2.11 mdrmteMinorPERExceeded INTEGER read-only
This parameter indicates if
the minor packet
(uncorrectable by FEC)
error rate has been
exceeded based on the
defined
.1316.1.1.1.1.2.12 mdrmteMajorPERExceeded INTEGER read-only
This parameter indicates if
the major packet
(uncorrectable by FEC)
error rate has been
exceeded based on the
defined
.1316.1.1.1.1.2.13 mdrmteCriticalPERExceeded INTEGER read-only
This parameter indicates if
the critical packet
(uncorrectable by FEC)
error rate has been
exceeded based on the
defined
.1316.1.1.1.1.2.14 mdrmtePrevParamsRestored INTEGER read-only
Indicates if autorecovery
for the RF Unit settings
had to be invoked
.1316.1.1.1.1.2.15 mdrmteAveragePER DisplayString read-only
This is the current Average
Packet Error Rate and is
based on the number of
.1316.1.1.1.1.2.16 mdrmteStartSweep INTEGER read-write
This is used to start the
spectral RSSI sweep.
.1316.1.1.1.1.2.17 mdrmteRssiSpectrum DisplayString read-only
This contains the results of
the sweep through the
spectum of
.1316.1.1.1.1.3 mdrmteG826