User Manual

MDR2400/5800-SR, Orion2410/5810-SRi and Orion 5825-SR
862-01881 Issue 12c Page 6
4.1 Customer Furnished Tools and Equipment 30
4.2 Digital Indoor Unit 31
4.2.1 Introduction 31
4.2.2 Installing the Digital Indoor Unit in a Rack 31
4.2.3 Connecting a DC Power Supply 32
4.2.4 Balanced Payload Data : DB25 33
4.2.5 Balanced Payload Data : RJ48 34
4.2.6 Unbalanced Payload Data : BNC 34
4.2.7 Connecting Auxiliary In/Out (Optional) 34
4.2.8 Connecting the Service (Wayside) Serial Channel (Optional) 35
4.2.9 Connecting the Element Manager Port 36
4.3 RF Unit 36
4.3.1 RF Connection 36
4.4 Interconnection Cable Installation 37
4.4.1 INTERCONNECTION CABLE WIRING DESCRIPTION 39
5 ANTENNA ALIGNMENT AND SOFTWARE SETUP 40
5.1 Installation Equipment Required 40
5.2 Information Required 40
B.1 Antenna Alignment 40
5.2.1 Introduction 40
5.2.2 Alignment Procedure 40
5.2.3 Set Transmitted Power Level 42
5.3 Software Setup 43
5.4 Functional Test 43
5.4.1 Link Bit Error Rate Performance Test 43
5.5 MDR / Orion Installation Record 44
5.6 MDR / Orion Test Record 45
6 NMS SOFTWARE 46
6.1 Scope 46
6.2 Introduction 46
6.3 System requirements 47
6.4 Installing the NMS 47
6.4.1 JRE Installation 47
6.4.2 NMS Installation 47
6.4.3 NMS Un-Installation 48
6.5 Help documentation 48
7 MAINTENANCE INFORMATION 49
8 TECHNICAL DATA 50
8.1 Environmental Requirements 50