User's Manual

MDR2400-SR, MDR5800-SR and Orion 5825-SR
Issue 10 Page 98
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.3.1.1.1.4 mdrmteLEDColour INTEGER read-only
The current colour of the
LED - for a detailed
description of functionality,
see the mdrmteLEDLabel
entry
.1316.1.1.1.3.1.1.1.5 mdrmteLEDHistoricAmberWarning INTEGER read-only
The number of Amber
'blips' that the LED is
flashing
.1316.1.1.1.3.1.1.1.6 mdrmteLEDHistoricRedError INTEGER read-only
The number of Red 'blips'
that the LED is flashing
.1316.1.1.1.3.1.2 mdrmteOutdoorUnitComms INTEGER read-only
Describes the state of
Indoor Unit communication
with the Outdoor unit.
.1316.1.1.1.3.1.3 mdrmteOutdoorUnitResetType INTEGER read-only
This message is read from
the Outdoor Unit and
identifies the last reason
for a reset within the
.1316.1.1.1.3.1.4 mdrmteOutdoorUnitLockDetect INTEGER read-only
The transmit RF
synthesizer, receive RF
synthesizer and IF phased
locked loop lock detect
signals
.1316.1.1.1.3.1.5 mdrmtePayloadDrive INTEGER read-only
In a One-Plus-One
configuration, this tells you
if this IU is driving the
.1316.1.1.1.3.1.6 mdrmteLock INTEGER read-only
In a One-Plus-One
configuration, this tells you
if this IU is driving the
.1316.1.1.1.3.1.7 mdrmtePeerPayloadDrive INTEGER read-only
In a One-Plus-One
configuration, this tells you
if the peer (standby) is
driving the
.1316.1.1.1.3.1.8 mdrmtePeerLock INTEGER read-only
In a One-Plus-One
configuration, this tells you
if the peer (standby) is
driving the
.1316.1.1.1.3.1.9 mdrmteOuEtherRate INTEGER read-only
The current (actual) Data-
rate of the ethernet link
between the IU and the
OU.
.1316.1.1.1.3.2 mdrmteSelfTest
.1316.1.1.1.3.2.1 mdrmteFlash INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's
application flash
.1316.1.1.1.3.2.2 mdrmteDRAM INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's
Dynamic RAM
.1316.1.1.1.3.2.3 mdrmteSRAM INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's Static
RAM
.1316.1.1.1.3.2.4 mdrmteLineInterface INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's Line
Interface IC
.1316.1.1.1.3.2.5 mdrmteFPGA INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's FPGA
interface registers to the
microprocessor
.1316.1.1.1.3.2.6 mdrmteFEC INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's FEC IC
electrical interface
.1316.1.1.1.3.2.7 mdrmteRealTimeClock INTEGER read-only
Identifies pass/fail status
of the Indoor Unit's Real
Time Clock
.1316.1.1.1.3.2.8 mdrmteIndoorUnitResetType INTEGER read-only
This message is read from
the Indoor Unit and
identifies the last reason
for a reset within the
.1316.1.1.1.3.2.9 mdrmteLoopbackMode INTEGER read-write
Entry defines the loopback
mode of a radio station in
terms of loopback at either
.1316.1.1.1.3.2.10 mdrmteLoopbackTimeOut INTEGER read-write
This is the number of
seconds the loopback will
run for until it times out