User's Manual

MDR2400-SR, MDR5800-SR and Orion 5825-SR
Issue 10 Page 6
4.1 Customer Furnished Tools and Equipment 31
4.2 Indoor Unit 32
4.2.1 Introduction 32
4.2.2 Installing the Indoor Unit in a Rack 32
4.2.3 Connecting a DC Power Supply 33
4.2.4 Balanced Payload Data : DB25 34
4.2.5 Balanced Payload Data : RJ48 35
4.2.6 Unbalanced Payload Data : BNC 35
4.2.7 Connecting Auxiliary In/Out (Optional) 35
4.2.8 Connecting the Service (Wayside) Serial Channel (Optional) 36
4.2.9 Connecting the Element Manager Port 36
4.3 Outdoor Unit 38
4.3.1 RF Connection 38
4.4 Interconnection Cable Installation 38
4.4.1 INTERCONNECTION CABLE WIRING DESCRIPTION 40
5 ANTENNA ALIGNMENT AND SOFTWARE SETUP 42
5.1 Installation Equipment Required 42
5.2 Information Required 42
5.3 Antenna Alignment 42
5.3.1 Introduction 42
5.3.2 Alignment Procedure 42
5.3.3 Set Transmitted Power Level 44
5.4 Software Setup 45
5.5 Functional Test 45
5.5.1 Link Bit Error Rate Performance Test 45
5.6 MDR / Orion Installation Record 46
5.7 MDR / Orion Test Record 47
6 NMS SOFTWARE 48
6.1 Scope 48
6.2 Introduction 48
6.3 System requirements 48
6.4 Installing the NMS 49
6.4.1 JRE Installation 49
6.4.2 NMS Installation 49
6.4.3 NMS Un-Installation 49
6.5 Help documentation 50
7 MAINTENANCE INFORMATION 51
8 TECHNICAL DATA 52
8.1 Environmental Requirements 52