User's Manual

MDR2400-SR, MDR5800-SR and Orion 5825-SR
Issue 10 Page 107
If you want to delete the route, use
Batch file 2 - delroute.bat
route delete 10.11.0.0
If you want a screen printout of the routes the PC is using, use the command line
entry:
route print
NOTE
DO NOT ALLOW AN RF LINK TO ESTABLISH BEFORE DOING A PING on the
remote IU (with 10.11.1.2 as an IP address) - if the RF link was established
before, use the front panel button "position 3" to reset the IU before
attempting to ping.