User's Manual

MDR2400-SR, MDR5800-SR and Orion 5825-SR
Issue 10 Page 100
Object ID Object name Object Type
Access
Rights
Description
.1316.1.1.1.3.6 mdrmteClearEventLog INTEGER write-only
This entry is used to clear
the Event Log
.1316.1.1.1.3.7 mdrmteResetAllFaults INTEGER write-only This entry is used to
.1316.1.1.1.3.8 mdrmteEnableDebug INTEGER read-write
This entry is used to
enable test and debugging
features
.1316.1.1.1.3.9 mdrmteErrorWindow INTEGER read-write
This entry is used to set
the time period in minutes
during
.1316.1.1.1.3.10 mdrmteTrapData DisplayString read-only
Textual description or data
relating to a trap
.1316.1.1.1.3.11 mdrmteLogCorrectedSymbols INTEGER read-write
Enable or disable periodic
logging of corrected
sybmols
.1316.1.1.1.3.13 mdrmteHideHistoricLeds INTEGER read-write
Enable or disable the
'historic' flashing on the
LEDs
.1316.1.1.1.3.12 mdrmteEngineering
.1316.1.1.1.3.12.1 mdrmteDataStreamStatus INTEGER read-only
Status bits for the outdoor
unit and tribs during during
production tests.
.1316.1.1.1.3.12.2 mdrmteFramingSchedule INTEGER read-only
The current framing
schedule selected on the
FPGA
.1316.1.1.1.3.12.3 mdrmteFrameTribCnt INTEGER read-only
The number of tribs
supported by the framing
structure in use
.1316.1.1.1.3.12.4 mdrmteIuBackToBack INTEGER read-write
Loop one Indoor unit to
another without Outdoor
units for production tests
.1316.1.1.1.3.12.5 mdrmteWaysideFeedsOu INTEGER read-write
Feed the Wayside channel
to the Outdoor Unit for
production tests
.1316.1.1.1.4.1 mdrmteEthernetIPAddress IpAddress read-write
The IP address associated
with product's Ethernet
port.
.1316.1.1.1.4.2 mdrmteEthernetNetMask IpAddress read-write
The netmask associated
with the Ethernet port
.1316.1.1.1.4.3 mdrmteMaxNumUsers INTEGER read-only
If the firmware is compiled
with the security feature
.1316.1.1.1.4.4 mdrmteMaxNumActiveUsers INTEGER read-only
If the firmware is built with
the security feature
switched on, users
.1316.1.1.1.4.5 mdrmteNumActiveUsers Gauge read-only
If the firmware is built with
the security feature
switched on, users
.1316.1.1.1.4.6 mdrmteUserTable SEQUENCE not-accessible Deprecated
.1316.1.1.1.4.6.1 mdrmteUserEntry MdrmteUserEntry not-accessible Deprecated
.1316.1.1.1.4.6.1.1 mdrmteUserIndex INTEGER read-only Deprecated
.1316.1.1.1.4.6.1.2 mdrmteUserName DisplayString read-write
If the firmware is built with
the security feature
switched on, users
.1316.1.1.1.4.6.1.3 mdrmteUserPassword DisplayString write-only
If the firmware is built with
the security feature
switched on, users
.1316.1.1.1.4.6.1.4 mdrmteUserAccessLevel INTEGER read-write
If the firmware is built with
the security feature
switched on, users
.1316.1.1.1.4.6.1.5 mdrmteUserActive INTEGER read-write
Indicates if a user is active
or not based on password
entry
.1316.1.1.1.4.6.1.6 mdrmteUserAdd INTEGER write-only
In security-enabled mode,
allows an administrator to
add users
.1316.1.1.1.4.6.1.7 mdrmteUserDelete INTEGER write-only
In security-enabled mode,
allows an administrator to
delete users