Manualshelf

User Manual

ManualsBrandsAVI ManualsComputer Accessories & PeripheralsAVI HDBaseT HDMI 2.0 HDCP 2.2 4K 4X4 HDMI Matrix Extender Switcher with 4 POE Receivers Over Single Cat5e/6 Cable Supports Ultra HD 3D 60HZ @ 4Kx2K with Bi-Directional IR (Matrix+4receivers)
12345678910
8
4. IR system.
The matrix can pass the IR signal through the IR system to the HDMI source
or pass the IR signal from the HDMI source to the HDMI sink
1) Control the sources from the sinks
Step1: Connect 4pcs “IR Out” cables to “IR Out” ports on the matrix, connect 4pcs “IR In”
cables to the “IR In” ports on the receivers.
Step2: Affix the 4xIR emitter of “IR out” cables to the IR window of the 4xHDMI source
Step3: Aim the remote control of HDMI source which you choosed to the “IR In” cable which
connected to the receiver.