User Manual

7
2. Local IR remote control.
User can control the HDMI route of the matrix by using the IR remote.
There are four group key pads for four output ports. For each output port
source selection, there are 4 number keys and two arrow keys. Press number
keys to select specific input port. Left arrow button to backward the input port,
and right arrow to forward input port.
3. IR extender control.
User can use the IR receiver cable to change the IR receiver position.
If controlling the HDBaseT Matrix through the 1/8” (3.5 mm) input jack on the
rear panel, connect the IR cable directly to the matrix rear IR receiver
extension sockets.