User manual

38
AVG Rescue CD © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
make sure you always use the appropriate 32bit (x86) drivers when adding new
drivers! Otherwise AVG Rescue CD may become unstable!
You can add your custom network adapter drivers to AVG Rescue CD using the
AVG Rescue CD Creator utility. The process of adding the files is described in
chapter 2.3. To find out, which specific driver files you should add, follow the steps
below.
This procedure applies only to cases, when you are going to use AVG Rescue CD
on the same computer (identical hardware), from which you are using the network
adapter drivers. If you plan to use AVG Rescue CD on a computer with different
hardware equipment, the added drivers will most likely not work properly.
a) First navigate to the Windows Device Manager.
Click the Windows Start, right-click My Computer and select Manage. In
the new dialog select Device Manager from the System Tools branch.
b) In the right part of the screen navigate to the Network adapters item. Here
you will find a list of available network adapters. If there are multiple items
listed, look for the adapter you use for Internet connection (if you are
connecting via LAN/WAN network, look for names like Ethernet NIC, LAN
CARD, LAN Adapter, Ethernet Controller etc.).
If you cannot recognize your network adapter from multiple choices, repeat
the steps c) to d) for all the available network cards.