User manual

27
6.4.2. System Restore
Start the AVG Rescue Center module by clicking Undo changes in the category Status &
Recommendations of the Start Center.
Alternatively, you can start the module by going to Overview of all functions in the Start Center and
selecting the Undo changes entry under AVG PC TuneUp.
Click on System Recovery.
In the right-hand column, AVG Rescue Center shows you a list of all stored backups and also the time at
which each entry was changed.
Create Backup
Use this button to create a system restore point. Give this point a name by which to remember this system
status at a later time.
Since a system restore point saves the status of your configuration and system files, you are advised to
create a system restore point before making any significant changes to the system (such as installing a
program). If something goes wrong during installation or your computer no longer works the way it used to, you
can always restore it back to its original status at any time.
Since a system restore point saves the status of your configuration and system files, you are advised to
create a system restore point before making any significant changes to the system (such as installing a
program). If something goes wrong during installation or your computer no longer works the way it used to, you
can always restore it back to its original status at any time.
Delete
If you are quite certain that you no longer need a backup, you can delete it permanently using this button.
Restore
Use this button to restore the system to its status before the selected backup. You will need to restart your
system.
This function is useful if your computer no longer functions properly following a change to the system.
First, select a restore point that is as recent as possible, in order to avoid undoing too many system
changes.
6.4.3. Changing Settings
You can change some of the settings of the AVG Rescue Center. In the AVG Rescue Center click on the
Settings button.
Alternatively, you can enter these settings from the Start Center. In the Settings menu, select the General
entry and open the Rescue Center tab.