User manual
www.grisoft.com
Copyright (c) 1992-2006 GRISOFT, s.r.o. All rights reserved.
AVG Linux Email Server / User Manual
29
6.2. AVG for Kerio MailServer Maintenance
The anti-virus protection mechanism is integrated directly into the
Kerio
MailServer
application. In order to activate e-mail protection of Kerio MailServer
by the
AVG Anti-Virus scanning engine, launch the Kerio Administration
Console
application (using the kerioadmin command in your shell). In the control
tree on the left side of the application window choose the
Antivirus sub-branch in
the
Configuration branch:
Click the
Antivirus item to open the Antivirus dialog window. There are three tabs
in the window:
z Antivirus
z Attachment Filter
z Action
To save the changes press the
Apply button in the bottom area of the configuration
window. You can also return to the previously saved state by pressing the
Reset
button.
a)
Antivirus Tab
To activate
AVG for Kerio MailServer, select the Use external antivirus
radio button and choose the
Grisoft AVG for Linux Edition 7.1 item from
the external software menu on the
Antivirus tab of the configuration window:
You can press the
Options button to open the following window:
In this window you can change the values of the address and port the
AVG for
Linux
e-mail scanning daemon is listening on.
Note: You must set the appropriate values here, if you changed the address
and port default settings in the
AVG for Linux E-mail Server configuration
file (refer to section
8.3 Configuration File/AvgDaemon for detailed information
on the configuration file)!