User manual

A V G Internet Security Business Edition 2012 © 2012 C opyright A V G Tec hnologies C Z, s.r.o. A ll rights reserved. 59
Click the Finish button to close the wizard.
There are several options for how to use the produced script file. Here are the two most common
examples:
To use the script saved to a folder:
1. Copy the whole contents of the previously chosen folder to your station.
Note: If you used a network folder for storing the script, you can navigate to that folder
directly over the network.
2. On the station navigate to this folder and run the AvgSetup.bat file.
3. The command line window will appear and the installation will begin.
4. Once the installation is completed, the window will close automatically.
You can also put the script on a removable device, such as an external hard drive, USB flash disk
etc.
To use the script from a removable device:
1. Insert the removable device to your station.
2. If the autorun feature is enabled in the station's operating system and you chose to create the
autorun.inf file during script preparation, the installation will start automatically.
3. If not, open the removable device disk letter and run the AvgSetup.bat file manually.
4. The command line window will appear and the installation will begin.
5. Once the installation is completed, the window will close automatically.