User manual

Table Of Contents
A V G Internet Security Business Edition 2012 © 2012 C opyright A V G Tec hnologies C Z, s.r.o. A ll rights reserved. 10 1
non-mandatory settings are transferred from the Station to the DataCenter.
The synchronization is performed periodically. By default, the settings synchronization process is
done every 60 minutes. To alter the synchronization period for all stations, follow these steps:
1. In the AVG Admin Console select Tools from the upper main menu and choose the Shared
settings for stations item.
2. Select the Remote Administration node.
3. From the Synchronize configuration every drop down menu choose the required value.
Close the dialog by clicking the OK button.
4. Wait until all stations get synchronized.
Alternatively, you can force immediate synchronization of all stations: In the navigation tree, right-
click on the Stations node and select Synchronize settings from the context menu.
Note: To change the setting only for stations in a group, simply repeat the process from step two
after you right click on Stations/YourGroupName and select Shared Settings for group from the
context menu.
Additionally, the synchronization happens:
every time the station powers on/goes online, its settings are synchronized at latest within the
period,
when the station connects to the AVG DataCenter the first time, its settings are
synchronized immediately,
when settings of a station or several stations are changed and confirmed from the AVG Admin
Console.
It is also possible to request immediate settings synchronization from the AVG Admin Console.
Simply right-click on a station's node in the navigation tree or on a particular station in a stations
view and select Synchronize settings from the context menu.
6.3.2. Scan Results Synchronization
This synchronization process sends data from the station to the AVG DataCenter. It takes place:
every time the station powers on/goes online (at the latest within 20 minutes),
immediately after scan completion or after an infection is detected by the Resident Shield,
immediately or latest within 20 minutes when there is a scan result modification done by a
user on the station in the AVG User Interface (healing, moving to vault etc.).
It is also possible to request immediate scan results synchronization from the AVG Admin Console
. Simply right-click on a station's node in the navigation tree or on a particular station in a stations
view and select Tasks related to Scan/Ask for scan results from the context menu.