User manual

A V G 9 Internet Sec urity © 20 1 0 C opyright A V G Technologies C Z, s .r.o. A ll rights res erved. 14 6

Fixed host - In this case, the program will always use the server

specified here. Please specify the address or name of your mail server.

The login name remains unchanged. For a name, you may use a domain

name (for example, pop.acme.com) as well as an IP address (for example,

123.45.67.89). If the mail server uses a non-standard port, you can

specify this port after the server name by using a colon as the delimiter

(for example, pop.acme.com:8200). The standard port for POP3

communication is 110.

· Additional settings - specifies more detailed parameters:

Local port - specifies the port on which the communication from your

mail application should be expected. You must then specify in your mail

application this port as the port for POP3 communication.

Use APOP when available - this option provides more secure mail server

method of forwarding the user account password for login, sending the

password to the server not in an open, but in an encrypted format using

a variable chain received from the server. Naturally, this feature is

available only when the destination mail server supports it.

Connection - in the drop-down menu, you can specify which kind of

connection to use (regular/SSL/SSL default). If you choose SSL

connection, the data sent is encrypted without the risk of being traced

or monitored by a third party. This feature is also only available when the

destination mail server supports it.

· E-mail client POP3 server settings - provides brief information on the

configuration settings required to correctly configure your e-mail client (so

that the E-mail Scanner will check all incoming mail). This is a summary

based on the corresponding parameters specified in this dialog and other

related dialogs.

· E-mail client POP3 server activation - check/uncheck this item to activate

or deactivate the specified POP3 server