User manual

166
AVG 8.5 Internet Security © 2008 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
 Scanning parameters - in the list of scanning parameters you can switch on/
off specific parameters as needed. By default, most of the parameters are
switched on and these will be used automatically during scanning.
 Scan process priority - you can use the slider to change the scanning
process priority. By default, the priority is set to medium level (Automatic scan
) that optimizes the scanning process speed and the use of system resources.
Alternatively, you can run the scanning process slower which means the
system resources load will be minimized (useful when you need to work on the
computer but you do not care so much how long the scanning takes), or
faster with increased system resources requirements (e.g. when the computer
is temporarily unattended).
 Set additional scan reports - the link opens a new Scan Reports dialog
where you can select what types of possible findings should be reported: